Description

 Control of Standard Components

ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Temperature 1 Pt100 sensor DIN class A in 4-wire-circuit
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

 Temperature

Set temperature range in °C min. 5°C above ambient up to +300°C
resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)

 Control Technology

adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
Function SetpointWAIT the process time does not start until the set temperature is reached
Language setting German/English/Spanish/French
Calibration three freely selectable temperature values

 Ventilation

natural convection
Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
Vent vent connection with restrictor flap

 Communication

Programming AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Documentation programme stored in case of power failure

 Safety

Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system for fault analysis

 Standard Equipment

Door fully insulated stainless steel doors with 2-point locking (compression door lock)
Installation on lockable castors
Internals 2 stainless steel grids
Scope of delivery incl. works calibration certificate for +160°C
Housing rear zinc-plated steel
Interior easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

 Stainless Steel Interior

w(A) x h(B) x d(C): 1040 x 1200 x 600 mm
Volume 749 l
Max. loading of chamber: 300 kg

 Textured Stainless Steel Casing

w(D) x h(E) x d(F): 1224 x 1726 x 784 mm

 Electrical Data

400 V, 3 phases, 50 Hz / approx. 7000 W

 Packing/Shipping Data

the appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 1330 x 1910 x 1050 mm
Net weight approx. 217 kg
Gross weight carton approx. 288 kg