Carbon Dioxide Chemical Test Kit


The HI3818 is a chemical test kit that measures carbon dioxide by titration with sodium hydroxide. The HI3818 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests. The HI3818 is a titration-based chemical test kit that determines the carbon dioxide concentration in three ranges: 0 to 10 mg/L CO2, 0 to 50 mg/L CO2, and 0 to 100 mg/L CO2.

•  All reagents marked with expiration date and lot number for traceability
•  Manual titration performed with phenolphthalein indicator
•  Pre-made reagents for ease of use

Features at-a-glance
Complete setup
•  All required materials are included with the test kit, such as two sample beakers, reagent bottles, and calibrated syringe.

  High resolution
•  Readings from 0 to 10 mg/L COare determined to 0.1 mg/L resolution.
•  Readings from 0 to 50 mg/L CO2 are determined to 0.5 mg/L resolution.
•  Readings from 0 to 100 mg/L CO2 are determined to 1 mg/L resolution.

  Replacement reagents available
•  There is no need to buy a new kit when reagents are exhausted.
•  The HI3818-100 reagent set can be ordered to replace the reagents supplied with the kit. This set comes with 1 (10mL) dropper bottle of phenolphthalein indicator and 1 (120mL) bottle of HI3818-0 titration solution.

  Significance of Use
•  Lakes and rivers naturally contain carbon dioxide concentrations less than 10 mg/L. However, stagnant or polluted water can generate large amounts of carbon dioxide due to organic or mineral decomposition.
Higher amounts of carbon dioxide can make the water corrosive and toxic to aquatic organisms. Monitoring carbon dioxide levels is also critical in the manmade environment.
Carbon dioxide is added to drinking water during the final stages of the purification process. In water softening systems, a delicate balance of carbon dioxide must be maintained to prevent corrosion or encrustation of pipes and storage tanks.


  Range : 0.0 to 10.0 mg/L (ppm) CO₂; 0.0 to 50.0 mg/L (ppm) CO₂; 0 to 100 mg/L (ppm) CO₂
  Resolution : 0.1 mg/L (0.0 to 10.0 mg/L range); 0.5 mg/L (0.0 to 50.0 mg/L range); 1 mg/L (0 to 100 mg/L range)
  Method : phenolphthalein
  Number of Tests: 110
  CTK Type : Titration
  Ordering Information : HI3818 test kit comes with 1 (10 mL) dropper bottle phenolphthalein indicator, 120 mL bottle carbon dioxide reagent, 10 mL calibrated vessel, 50 mL calibrated vessel and calibrated syringe.
  Proposition 65 : WARNING: This product can expose you to chemicals including Phenolphthalein, which is known to the State of California to cause birth defects or other reproductive harm.

Order now

To make your order, please contact us at  info@polyscientific.com.my or call us at +6 06 3350 690

Go to Top