HI1610D

pH Electrode with Built-In Temperature Sensor and DIN Connector

Description

The HI1610D is a glass body, refillable, single junction pH electrode with a DIN connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with general purpose glass. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design. This design consideration is ideal for laboratory and general purpose use. The HI1610D is recommended for use with Hanna’s HI8314 pH meter.

•  Built-In Temperature Sensor
•  Refillable Electrode
•  Single Ceramic Junction

  The HI1610D uses general purpose (GP) glass, spherical bulb, glass body, single ceramic junction and is refillable with 3.5M KCl + AgCl.
General Purpose Glass Formulation
•  The measurement of pH at very high temperatures is detrimental to the sensitive glass bulb and will shorten the life of it.
•  A pH electrode with general purpose (GP) glass will have a resistance of 100 megaohms at 25°C while the resistance of LT glass is around 50 megaohms at 25°C.
•  As the temperature of the glass decreases in the sample, the resistance of the LT glass will approach that of GP glass.
•  If using GP glass, the resistance would increase above the optimum range, resulting in increased impedance and ultimately affecting the measurement.
•  The HI1610D is suitable to use with samples that measure from 0 to 70°C.

  Spherical Bulb
•  The spherical bulb is for general purpose use.
•  Other tip shapes include conic for penetration and flat tip for surface measurements.

  Glass Body
•  The glass body is ideal for laboratory use.
•  The glass is resistant to many harsh chemicals and is easily cleaned.
•  The glass body also allows for a fast transfer of heat to the internal reference electrolyte.
•  The mV generated by the reference cell is temperature dependent.
•  The faster the electrode reaches equilibrium, the steadier the reference potential.

  Single Ceramic Junction
•  The outer junction of an electrode, also known as a salt bridge, is necessary component of the electrical circuit.
•  The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit.
•  The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient.
•  A single ceramic junction has a flow rate of 15-20 μL/hour.
•  Other junction types are available with higher flow rates and made with different materials.

  Refillable
•  The HI1610D is a refillable probe.
•  Since it is a single junction pH electrode the fill solution is the HI7071 3.5M KCl + AgCl.
•  If using a refillable pH electrode, the fill cap should be removed prior to calibration and measurement.
•  Removing the cap creates positive head pressure in the reference cell allowing for higher flow rate of electrolyte through the outer junction.
•  A higher flow rate will result in a faster and more stable reading.

  DIN Connector
•  The HI1610D uses a DIN connector.
•  This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable.
•  The HI1610D is recommended for use with Hanna’s HI8314 pH meter.
•  Other type of connectors include BNC, screw type, T-type, and 3.5mm to name a few.

     SPECIFICATIONS

    Body Material                          :  glass
    Reference                                :  single, Ag/AgCl
    Junction / Flow Rate               :  ceramic, single / 15-20 μL/h
    Electrolyte                              :  3.5M KCl + AgCl
    Range                                     :  pH: 0 to 13
    Max Pressure                           :  0.1 bar
    Tip Shape                               : spheric (dia: 9.5 mm)
    Diameter                                 :  12 mm
    Body Length / Overall Length  :  120 mm / 175.5 mm
    Recommended Operating

Temperature                            :

 

0 to 70°C (32 to 158°F) – GP

    Temperature Sensor                :  yes
    Matching Pin                           :  no
    Amplifier                                 :  yes
    Digital                                     :  no
    Cable                                      :  5-pole; 1 m (3.3′)
    Connection                             :  DIN
    Applications                            :  laboratory general purpose
    Warranty                                 :  6 months

Order now

To make your order, please contact us at  info@polyscientific.com.my or call us at +6 06 3350 690

Go to Top